CNC High-speed Vertical Lathe
Brand QIER WAJI CNC MACHINE
Product origin CHINA LIAONING
Delivery time 3 months
Supply capacity 2-5 units per month
1.CNC High-speed Vertical Lathe is a high-speed, high-precision and high-reliability machine tool. The main components such as the bed and headstock are made of high-strength materials to ensure the long-term stability of the machine tool.
2.CNC High-speed Vertical Lathe has a vertical structure with good stability and seismic performance
Introduction of CNC High-speed Vertical Lathe:
CNC High Speed Vertical Turing Lathes are featured with high speed and high efficiency and they are used to machine various parts with high precision requirements.The table guideways are large ball bearings to satisfy the requirements on high speed cutting. In the transmission,it is equipped with two mechanical shifts.The main motor is AC Variable Frequency Drive or DC motor.The operational codes are standard international ones and only basic training is required for the operation before the operator runs the machine independently.
CNC system is optional with Siemens, Fanuc or Fagor.
The four-position electrical tool post or standard turning tool clamper are available according to the type of ram.
Specifications of CNC High-speed Vertical Lathe:
Specification |
Unit |
CKS5116 |
CKS5120 |
CKS5225 |
Table Diameter |
mm |
1250 |
1800 |
2250 |
Max. Machining Diameter |
mm |
1600 |
2000 |
2500 |
Max. Workpiece Height |
mm |
1250 |
1600 |
1600/2000 |
Max. Workpiece Weight |
t |
8(≦80rpm) |
12(≦50rpm) |
16/20 |
Arbor Section |
mm |
32x32 |
40x40 |
40x40 |
Max. Cutting Force of Railhead |
KN |
16 |
25 |
32 |
Max. Torque of Table |
KNm |
10 |
25 |
32 |
Table Speed, Steps |
Stepless/Infinitely Variable |
|||
Range |
r.min |
2.5 - 400 |
2-250 |
1.6-200 |
Feed Range |
mm/min |
0.1-2000 |
0.1-2000 |
0.1-2000 |
Railhead Travel Horizontal |
mm |
-20-1000 |
-20~1250 |
-20-1500 |
Vertical |
mm |
800 |
1000 |
1000/1250 |
Rapid Traverse Rate of Railhead |
mm/min |
12000 |
10000 |
4000 |
Max. Travel of Crossrail |
mm |
1000 |
1200 |
1250/1650 |
Crossrail Positioning, Pitches |
mm |
125 |
200 |
|
Steps |
8(9 Location) |
6(7 Location) |
— |
|
Crossrail Travel Rate |
mm/min |
410 |
360 |
350 |
Main Motor Power |
kw |
30(AC) |
55(DC) |
55(DC) |
Cross Rail Motor Power |
kw |
7.5 |
11 |
11 |
CNC System |
Siemens 802D/FANUC Oi-TC |
|||
No. of Axes Controlled Simultaneously |
2 |
2 |
2 |
|
Ram Section |
mm |
□200/Type T |
□220/Type T |
□220/Type T |
Other models of CNC High-speed Vertical Lathe:
CNC High-speed Vertical Lathe CKS5116,CNC High-speed Vertical Lathe CKS5120,CNC High-speed Vertical Lathe CKS5225
Precautions during use of CNC High-speed Vertical Lathe:
1. Before driving, pay attention to check the position of the handle and whether the claws are clamped to the workpiece.
2. Check the cleanliness of the CNC High-speed Vertical Lathe guide rail lubrication.
3. Check whether the signal light and the interlocking device are sensitive and reliable.
4. Check whether the moving parts enter the limit position and whether the screws are loosened before moving.
5. When the CNC High-speed Vertical Lathe table is not stopped, no mechanical speed change is allowed, but the stepless speed regulation part of the feed movement and the main movement can be adjusted at any time as needed.
6. When lifting the workpiece, 80 oil pump motors should be stopped first, so as to avoid the sudden increase of oil pressure when the lifting workpiece is unstable and damage the pressure gauge of the feedback valve.
7. Do not stop before the tool is withdrawn.
8. When the machine tool is packaged and stored for a long time, the exposed machined surface should be coated with anti-rust agent. If the oil seal period is exceeded, the oil seal should be re-sealed.
Introduction of factory production:
91视频 DALIAN WAJI CNC MACHINE Co., Ltd. is a joint-stock enterprise jointly invested by 91视频 affiliated to China General Technology Group and the former DALIAN WAFANGDIAN MACHINE GROUP Co., LTD., (WAFANGDIAN HEAVY MACHINE) in 2003. The company is located in Dalian Changxing Island industrial park, the beautiful shore of Bohai Sea. Our company registered paid-in capital of 80 million, factory covers an area of 13 acres that is a modern garden factory.
The company's sales network has spread all over the world. The company has always paid attention to human resource development and training to provide employees with a broad space for development. We will keep our promises, and take responsibility with excellent product quality. Sincerely hope that we can provide the best products and best services at the most competitive prices. Hope to establish multi-mode cooperation with old and new friends all over the world. Let us be a true partner.